Sort the brief by how the cloth is touched, weathered and assembled before you compare colors.
Indoor upholstery is judged with the hand as much as with a specification line. Ask how the cloth feels when it is folded over a cushion, how the surface looks under the room light you actually use, and which cleaning habit the household follows. A smoother decorative cloth and a tighter seating weave can share a color direction and still wear differently where arms and clothing rub. If abrasion, pilling or seam slippage matters, name the method and the specimen condition you want to see rather than borrowing a figure from another textile. Write the GSM target and the cuttable width you need for the pattern, and keep those numbers apart from the story about handfeel. Abrasion and handfeel are opposing review questions. A durability reading uses a named method and an end point, and it still does not describe how the cloth feels on an arm. A comfort reading uses the physical cutting in the room where people sit. You can keep a firmer face in order to discuss a documented wear method, or keep a softer hand and leave the wear number unresolved. Say which side the project will not give up.
Color approval for seating should name the physical reference. A photograph of a finished sofa is a scene, not a shade standard. If several lots may be used across a run of chairs, say that the shade band has to be agreed before bulk cloth is accepted. This card does not describe a completed installation or a customer result. It describes the questions that make an indoor brief reviewable.
Outdoor cushions, awning fabric and marine covers all meet weather, and they do not meet it in the same way. A loose seat pad may be lifted and stored. An awning stays tensioned. A marine cover may see salt air, folding and long sun. Say which of those patterns you mean when you ask about Sunbrella outdoor fabric or marine fabric. Split liquid water from vapour movement. A cloth can resist rain under one test and still be described with a different method for moisture passing through it. Lightfastness, if you need it, belongs with the method, the exposure cycle and the finish on the specimen.
Do not treat a marketing word such as performance as a measured result. Ask which property is relevant: surface water, color change, tear at a seam, or drying after a shower. Then ask which sample state was used, including whether the finish was new or already cleaned. Quantity and destination can wait in the next card. This card is about the exposure story.
A beautiful handle still has to be cut and joined. For upholstery, note pattern repeat if you know it, the direction of the face, and whether the usable width covers the cushion panels without an extra seam. For awnings and marine shade, note hem, reinforcement and how the edge is finished. Seam slippage and tear strength are separate conversations from the look of the face. If a coating or a laminate is part of the construction, say so, because edge behavior and sewing can change. If you do not know whether the cloth is coated, do not assume a membrane.
Dimensional stability matters when a cushion cover is washed or when a shade panel is tensioned. Ask for the care or process state that matches the real use, and keep the unit with the width. Roll length, if it affects yield, is an order detail to confirm against the named cloth. Stock selection still has to name the lot on hand and the shade band. Custom development still has to name the sample, the test and the bulk-approval point. Nothing on this card sets a minimum, a ship date or a factory location. It tells a cutter and a buyer which facts to put in the same note. A worked seating brief can carry a buyer target near 320 g/m² and a cuttable width near 140 cm, with composition shares that sum to 100% by mass. Those are request figures, not a published Sunbrella result.
An application page is a way to frame the environment, the stress and the assembly question. It is not a list of completed installations. Describe contact, exposure, care and processing separately, then ask which evidence belongs to that condition.
| Condition | Question | Evidence context |
|---|---|---|
| Daily contact | What touch, care and surface change matter? | Physical sample and the stated care context |
| Moisture | Is the question liquid resistance or vapour movement? | Method and specimen conditioning |
| Assembly | How will the textile be cut or joined? | Construction and usable width |
| Colour | Which physical reference is under review? | Shade approval notes, not a screen swatch |
Exposure, care and panel layout make the brief specific enough to answer.
Share your project